CUSTOMER PROJECTS

Our Case Studies 

In the case stud­ies of our cus­tomer projects you will learn how Jäger Gum­mi und Kun­st­stoff finds the right solu­tion for chal­leng­ing tasks togeth­er with you! Turn your projects into a suc­cess sto­ry togeth­er with us! Get excit­ing insights into our cur­rent case studies: 

Com­plex plas­tic hous­ing for elec­tric battery

Prod­ucts with high­ly spe­cial­ized mate­ri­als and tight tol­er­ances are used in elec­tro­mo­bil­i­ty. Devel­op­ment often takes place under enor­mous time pres­sure, which in this project is fur­ther increased by the addi­tion­al pro­duc­tion of 13 molds. 

Rub­ber pres­sure rollers for con­vey­or belts

In the devel­op­ment of larg­er sys­tems, small com­po­nents can often only be con­sid­ered to a lim­it­ed extent. In the area of con­vey­or belts, how­ev­er, there is enor­mous poten­tial for sav­ings through the method­i­cal opti­miza­tion of rub­ber pres­sure rollers. 

Inno­v­a­tive tube con­nec­tor for glass tube systems

Con­nect­ing glass tubes with con­ven­tion­al tube clamps pos­es dan­gers. If the fas­ten­ing is not per­fect­ly matched, there is a risk of leak­age or glass break­age. But a sim­ple as well as inge­nious assem­bly makes a per­fect con­nec­tion in no time at all. 

Reli­able elas­tomers in fire pro­tec­tion technology 

In fire pro­tec­tion tech­nol­o­gy, the high­est require­ments apply to all com­po­nents of the extin­guish­ing sys­tem. Com­po­nents made of rub­ber must have high tem­per­a­ture resis­tance and ensure reli­able use over sev­er­al years. 

Low-main­te­nance and robust rub­ber impact roller

The col­lec­tion of waste sets high stan­dards on the equip­ment used by waste dis­pos­al com­pa­nies. How­ev­er, thanks to the excep­tion­al prop­er­ties in terms of damp­ing and insu­la­tion of com­po­nents made of rub­ber, sen­si­tive ver­hi­cle parts can be effec­tive­ly protected. 

Plas­tic half-shells for wind turbines

When assem­bling rotor blades, sev­er­al thread­ed bolts must be fit­ted pre­cise­ly to the hub of the wind tur­bine. By using a sta­ble as well as cost-effec­tive solu­tion made of plas­tic, the bolts can be pro­tect­ed against dam­age effectively. 

Reli­able surge pro­tec­tion for wind turbines

To pro­tect sen­si­tive com­po­nents from over­volt­age, wind tur­bines place exten­sive demands on the com­po­nents installed. Reli­able oper­a­tion of the plant can be ensured through the per­fect coor­di­na­tion of mate­r­i­al and assem­bly process. 

Uni­ver­sal­ly applic­a­ble rub­ber hood for lab­o­ra­to­ry technology

In lab­o­ra­to­ry tech­nol­o­gy, the high­est pre­ci­sion is required! How­ev­er, mea­sur­ing instru­ments must also be opti­mized in terms of price in order to sur­vive on the mar­ket. There­fore, a com­pre­hen­sive solu­tion is devel­oped for immer­sion fit­tings in order to be able to equip sev­er­al vari­ants with only one rub­ber hood. 

Sealed roof steps thanks to reli­able EPDM Protection

The key chal­lenge in the con­struc­tion of roofs is per­ma­nent seal­ing against mois­ture. Roof steps are often pos­si­ble entry points, but with an intel­li­gent prod­uct enhance­ment made of EPDM, reli­able pro­tec­tion can be ensured. 

Spring ele­ments for agri­cul­tur­al technology

Rub­ber spring ele­ments for damp­ing vibra­tions are essen­tial com­po­nents of many agri­cul­tur­al machin­ery. By adapt­ing mate­ri­als, it is pos­si­ble to effi­cient­ly reduce the ener­gy and mate­r­i­al con­sump­tion in the pro­duc­tion of these components. 

That's new in our JÄGER Business Blog:

15. September 2021

How to select the appro­pri­ate gas­ket mate­r­i­al for the construction

The choice of sealing material has a great influence on the service life of a machine or plant. Do not only pay attention to the price!

Covid-19 Contents