/companies/jaeger-group/the-companies-at-a-glance/
A Company of the JÄGER Group
/companies/jaeger-group/the-companies-at-a-glance/
A Company of the JÄGER Group

Man­u­fac­tur­ing Processes 

At Jaeger Pol­s­ka we offer var­i­ous man­u­fac­tur­ing capa­bil­i­ties in rub­ber and plas­tic. We also have punch­ing machines, bowl­ing pin man­u­fac­tur­ing and sand­blast­ing equip­ment. Below you can learn more about our machinery! 

Our machin­ery

Com­pres­sion- und Transfer-Molding

  • 14 frame presses
  • max. clamp­ing dimen­sion 1,1000 x 1,100 mm
  • clamp­ing force up to 350 t

Injec­tion Molding

  • 7 injec­tion presses
  • injec­tion vol­ume up to 25 l
  • clamp­ing force up to 1,000 t

Rub­ber man­u­fac­tur­ing processes

Com­pres­sion- und Transfer-Molding

  • Appli­ca­tion: Small series, Large arti­cles, Prototypes
  • Advan­tage: Low invest­ment costs
  • Dis­ad­van­tage: Increased pro­duc­tion costs due to per­son­nel expenses

Trans­fer molding ™

  • Appli­ca­tion: Com­plex parts with tight tol­er­ances, small/medium series
  • Advan­tage: High dimen­sion­al accuracy
  • Dis­ad­van­tage: Increased mate­r­i­al waste

Injec­tion-Mold­ing (IM)

  • Appli­ca­tion: pre­ci­sion mold­ed parts with very tight tol­er­ances, large series and auto­mat­ed production.
  • Advan­tages: Short cycle times, low pro­duc­tion costs, pos­si­bil­i­ty to auto­mate the process.
  • Dis­ad­van­tage: High machine and tool costs

Pro­duc­tion of mold­ed rub­ber parts

  • cold/preheated mold­ing com­pound in the cavity
  • Mold­ing com­pound with pres­sure and heat
  • heat­ing via the mold wall (approx. 140–180 °C)
  • vul­can­iza­tion in the cavity
  • Demold­ing
  • If nec­es­sary, reheat­ing (“tem­per­ing”)

We also offer the fol­low­ing pro­duc­tion processes 

  • pro­file pro­duc­tion by extru­sion + vul­can­iza­tion (salt bath, UHF, IR)
  • hose pro­duc­tion (with and with­out insert)
  • vul­can­iza­tion in autoclave

Pro­duc­tion of plas­tic mold­ed parts 
Clos­ing force [t]
35
80
145
300
350 (foam system) 
Max. Injec­tion weight [g]
40
103
287
2.000
2.000 (foam system) 
Särad aus Kunststoff und Gummi

Jaeger Polska Spółka z o.o.
ul. Myśliwska 1
74-100 Gryfino (Polska)

Plant Manager: Tel. +48 91 447 2910
Purchasing: Tel. +48 91 447 2956
Personal: Tel. +48 91 447 2924
Accounting: Tel. +48 91 447 2925

Fax +48 91 447 2999
info@jaeger-polska.pl
www.jaeger-polska.pl

„Jaeger Polska” spółka z ograniczoną odpowiedzialnością mit Sitz in Gryfino, ul. Myśliwska 1, 74-100 Gryfino

Local court Szczecin-Centrum in Szczecin, 13. Economic Department of the National Court Register
KRS: 0000166746
Tax identification number: 8581000140
Amount of share capital: 8 000 000,00 PLN

Management: Dr.-Ing. Andreas Jäger

Privacy
Downloads

Contact
Contact Form

Ihre Kontaktdaten JPL

Bereich

Salutation

Bereich

Checkboxen *

Arnold Jäger Holding GmbH
Artemis Kautschuk- und Kunststoff-Technik GmbH
Artemis PC Pump Systems Ltd. 
Transportbandenfabriek EA Broekema B.V.
Broekema Beltway USA, Inc.
Jaeger Envirotech India Private Limited
Jäger Gummi und Kunststoff GmbH
Jaeger Maritime Solutions GmbH
Jaeger Rubber & Plastics  (Shenzhen) Ltd.
Jäger Umwelt-Technik GmbH
Jaeger-Unitek Sealing Solutions, Inc.
Spira Systems, Ltd.
Windgassen GmbH

Covid-19 Contents