Artemis has been suc­cess­ful­ly devel­op­ing, pro­duc­ing and dis­trib­ut­ing com­po­nents and sys­tems for the orig­i­nal equip­ment indus­try and the spe­cial­ized trade for decades. Our solu­tions are used in the fol­low­ing indus­tries, among others: 
Abfüllmaschine /artemis/applications/

Food Indus­try

Artemis man­u­fac­tures sta­tors and rotors for pro­gres­sive cav­i­ty pumps used in the food indus­try. In many areas, these han­dle the pump­ing of sen­si­tive and pasty media, which are also sub­ject to the strictest hygiene and safe­ty require­ments. Because we use stain­less steel for our sta­tor tubes and rotors, our com­po­nents meet inter­na­tion­al guide­lines — such as FDA — for the pro­duc­tion of hygien­i­cal­ly safe food­stuffs. Our food-grade rub­ber com­pounds are test­ed and con­firmed by exter­nal test­ing lab­o­ra­to­ries. 

Our sta­tors and rotors also enable long equip­ment life and avail­abil­i­ty, so food pro­duc­ers can avoid break­downs that would often lead to the spoilage of high vol­umes of prod­uct. 

Our sta­tors and rotors con­vey, for example: 

Envi­ron­men­tal Technology

Envi­ron­men­tal pro­tec­tion is one of the most impor­tant top­ics of the JÄGER Group, which is why we at Artemis have also devel­oped prod­ucts that help to pre­serve our habi­tats. Waste­water treat­ment — espe­cial­ly of munic­i­pal and indus­tri­al waste­water — has a cen­tral role to play here. This is the only way we can ensure opti­mum water qual­i­ty and also meet the grow­ing demand for drink­ing water. 

For this rea­son, sta­tors and rotors from Artemis in eccen­tric screw pumps of var­i­ous sizes per­form var­i­ous tasks in waste­water treat­ment plants. For exam­ple, the pump­ing of accu­mu­lat­ing sludge as well as the pre­cise dos­ing of clean­ing aids such as floc­cu­lants are clas­sic tasks of a pro­gres­sive cav­i­ty pump. 

Your Artemis advantages:


Dis­pens­ing technology 

In the auto­mo­tive and elec­tron­ics indus­tries, ever-small­er com­po­nents must be bond­ed or poured with­out drip­ping. Artemis sta­tors and rotors are used in pro­gres­sive cav­i­ty pumps that con­vey and meter var­i­ous media in the auto­mat­ed man­u­fac­tur­ing process of vehi­cles and elec­tron­ic com­po­nents. 

Appli­ca­tion of our meter­ing tech­nol­o­gy products:

Advan­tages of our sta­tors and rotors for dis­pens­ing technology: 


In the agri­cul­tur­al tech­nol­o­gy sec­tor, Artemis sta­tors and rotors find appli­ca­tions in bio­gas, slur­ry and feed­ing tech­nol­o­gy. 

Bio­gas plants and slur­ry tech­nol­o­gy
Espe­cial­ly in mod­ern bio­gas plants, pro­gres­sive cav­i­ty pumps are char­ac­ter­ized by good pump­ing behav­ior and a long ser­vice life com­pared to oth­er pump tech­nolo­gies.
In the field of slur­ry tech­nol­o­gy and bio­gas plants, our sta­tors made of wear-opti­mized com­pounds and our rotors with­stand stress­es caused by for­eign bod­ies (such as stones, sand, soil, metal­lic objects) and abra­sive com­po­nents of the con­stant­ly chang­ing media com­po­si­tion, such as silage and food waste. 

Feed­ing tech­nol­o­gy
Liq­uid feed­ing sys­tems are gen­er­al­ly used in mod­ern barn tech­nol­o­gy. Con­sis­tent pump­ing rates of pro­gres­sive cav­i­ty pumps are a basic require­ment for uni­form feed dis­tri­b­u­tion to the ani­mals through­out the barn.

Papierrolle in einer Maschine /artemis/applications/

Paper and pulp industry

While paper used to be pre­cious and was con­sid­ered white gold due to its white filler and coat­ing mate­r­i­al kaolin, today paper is avail­able for many uses thanks to mod­ern mass pro­duc­tion. What has remained, how­ev­er, is the demand­ing and high­ly pre­cise pro­duc­tion of paper and pulp.

High­ly sophis­ti­cat­ed machines are required for paper pro­duc­tion to guar­an­tee con­sis­tent qual­i­ties. Since paper is sub­ject to the high­est qual­i­ty stan­dards, each pump in a paper mill must be pre­cise­ly adapt­ed to the type of media being con­veyed — such as kaolin or pulp — in order to achieve a high-qual­i­ty end prod­uct.

All pro­duc­tion steps in mod­ern paper­mak­ing require the use of pro­gres­sive cav­i­ty pumps. Artemis sta­tors and rotors for the pulp and paper indus­try ensure max­i­mum accu­ra­cy in the con­vey­ing unit. They con­vey vis­cosi­ties from medi­um to high with some­times fri­able con­sis­ten­cy. Ben­e­fit from our wide prod­uct range from small meter­ing pumps to the largest sizes that can be man­u­fac­tured. 

Advan­tages of our sta­tors and rotors for the pulp and paper industry:

Chem­i­cal industry 

In the chem­i­cal indus­try, pro­gres­sive cav­i­ty pumps per­form a wide range of con­vey­ing and meter­ing tasks for which the right choice of mate­r­i­al is par­tic­u­lar­ly impor­tant in terms of mate­r­i­al resis­tance. Among oth­er things, our sta­tors can con­vey media with very high as well as very low PH val­ues and sol­vents.

Our devel­op­ment team there­fore sup­ports our cus­tomers in the selec­tion of the opti­mum rub­ber mate­r­i­al right from the inquiry stage, in order to be able to guar­an­tee them a long ser­vice life of the prod­ucts in their spe­cif­ic field of appli­ca­tion.

Rotors and sta­tors must meet the high­est qual­i­ty require­ments in this area, as plant fail­ures are not only cost-inten­sive, but may also entail fur­ther hazards.


Artemis has many years of expe­ri­ence in the design and pro­duc­tion of sta­tors and rotors for oil pro­duc­tion and also for down­stream pro­cess­ing. Pro­gres­sive cav­i­ty pumps are suc­cess­ful­ly used for petro­le­um pro­duc­tion. So-called down-hole pumps are char­ac­ter­ized by high effi­cien­cy com­pared to tra­di­tion­al pro­duc­tion equip­ment, because they score with their easy instal­la­tion and main­te­nance, good con­trol­la­bil­i­ty and high effi­cien­cy under dif­fi­cult pro­duc­tion con­di­tions.

The ser­vice life and func­tion of the down­hole pump depends to a large extent on the right com­bi­na­tion of sta­tor and rotor. This is because down­time due to pre­ma­ture fail­ure of the pump­ing ele­ments would trig­ger high costs.
The solu­tion is sim­ple: Artemis has devel­oped spe­cial mate­ri­als for sta­tors for down­hole pumps — they are high­ly abra­sion-resis­tant and have a long ser­vice life, even when car­bon diox­ide and hydro­gen sul­fide are present in the pumped medi­um.

Spe­cial­ly devel­oped (opti­cal) mea­sur­ing meth­ods guar­an­tee com­pli­ance with func­tion­al dimen­sions over the com­plete prod­uct length. Our goal is noth­ing less than achiev­ing max­i­mum prod­uct ser­vice life.



For­ward-look­ing con­vey­ing solu­tions are becom­ing increas­ing­ly impor­tant in terms of sus­tain­abil­i­ty, espe­cial­ly in the waste dis­pos­al and recy­cling indus­try. We are at your side as a devel­op­ment part­ner with inno­v­a­tive ideas. When recy­cling old road mate­ri­als and con­crete ele­ments, such as e.g. curb-stones, our belts con­vey the heavy goods dur­ing mate­r­i­al sep­a­ra­tion. Beach clean­ing machines, equipped with our screen­ing belts, have been ensur­ing opti­mum results for many years in dai­ly use in var­i­ous coastal areas. 

Con­vey­or technology

We sup­ply pro­cess­ing belts for indus­tri­al use, for exam­ple to con­vey heavy loads such as bags of ze-ments or oth­er mate­ri­als. Our solu­tions meet demand­ing cri­te­ria such as good straight run­ning, dura-bil­i­ty, low-vibra­tion trans­port and high sta­bil­i­ty in the belt. If your appli­ca­tion requires it, we also take good slid­ing or grip­ping prop­er­ties into account in the devel­op­ment process. The assem­bly of com­po-nents in con­vey­or tech­nol­o­gy must be quick­ly fea­si­ble in order to pre­vent long and cost-inten­sive down­times. Artemis offers a suit­able lock con­nec­tion devel­op­ment for this pur­pose. Ask our experts for the right solu­tion now! 

Wide belt sand­ing machines

Artemis pro­duces Best­Belt feed belts for users and man­u­fac­tur­ers of wide belt and brush sand­ing ma-chines. Our prod­ucts are used for appli­ca­tions rang­ing from hand­craft to the high­est loads in three-shift oper­a­tion in the wood or met­al work­ing indus­try. Our low man­u­fac­tur­ing tol­er­ances ensure the suc­cess of your sand­ing results. We man­u­fac­ture belts up to a width of 2,600 mm, for wider belts we will devel­op a suit­able solu­tion togeth­er with you. For our belts, we com­bine slid­ing lay­ers of high­ly abra­sion-resis­tant mate­r­i­al, low-stretch ten­sion mem­ber fab­ric and high-qual­i­ty com­pounds. Inno­va-tive join­ing tech­niques also ensure max­i­mum dura­bil­i­ty. At your request, we can also sup­ply the con-vey­or belts ground ready for instal­la­tion for vac­u­um operation. 


Our belts are used in sweep­ing machines to con­vey the dirt picked up by brush­es and oth­er car­ri­ers into the inte­ri­or of the sweep­er. In sweep­ing machine tech­nol­o­gy, we assume sys­tem respon­si­bil­i­ty for your spe­cif­ic appli­ca­tion. In addi­tion to end­less belts with locks, we also offer com­plete sys­tems con­sist­ing of belts and dri­ve ele­ments for urban and street cleaning. 

Snow cats

We sup­ply belts for orig­i­nal equip­ment or as spare parts for snow cats and snow groomers. The inno-vative “Gap Belt­ing Tech­nol­o­gy” used here makes it pos­si­ble to pro­duce a belt like made from a sin­gle mould with a fin­ished rub­ber cov­er. The inner fab­ric is thus per­fect­ly pro­tect­ed from exter­nal influ-ences such as frost and mois­ture and is less sus­cep­ti­ble. Com­pared to the con­ven­tion­al solu­tion, where the cov­er is only vul­can­ised on after­wards, our belt impress­es with extreme­ly high durability. 
Holzspäne auf Vorschubband /artemis/applications/


Visit us from 06/10 - 08/14
in hall 8.0 at booth E83
and discover our products

Covid-19 Contents