Wind Ener­gy — Sus­tain­able ener­gy production 

The JÄGER Group pro­duces mould­ed parts for the nacelle and the dri­ve train, com­pos­ite parts and seal­ing pro­files for nacelle and spin­ner fair­ings as well as flow aids for the pro­duc­tion of rotor blades. Our clients ben­e­fit from our com­pre­hen­sive con­cepts for trans­port pro­tec­tion as well as the added val­ue of our rub­ber-met­al ele­ments for vibra­tion damp­ing and decou­pling of wind tur­bines. The mate­ri­als for each project are indi­vid­u­al­ly adapt­ed to the exist­ing and expect­ed influences.

The basic struc­ture of the plant, con­sist­ing of a lat­tice tow­er, tubu­lar steel tow­er or con­crete tow­er, is also includ­ed in our devel­op­ment process­es. Depend­ing on the speed, rotor sur­face or tow­er diam­e­ter of the planned plant, the spe­cif­ic mate­r­i­al prop­er­ties must be tak­en into account from both a tech­ni­cal and an eco­nom­ic point of view. Sound project plan­ning and cost-ori­ent­ed prod­uct selec­tion are there­fore essen­tial. Wind tur­bines and wind pow­er plants can only reach their full per­for­mance if all installed parts are opti­mal­ly matched.

Due to our close and trust­ful coop­er­a­tion with the man­u­fac­tur­ers of wind tur­bines – espe­cial­ly with the man­u­fac­tur­ers of rotor blades, rotor hubs and rotor shafts as well as tur­bines and nacelles – we are very famil­iar with the chal­lenges of wind ener­gy. This means that we in the JÄGER Group have a con­stant eye on the devel­op­ments in the indus­try and can react quick­ly and eas­i­ly to any changes.